General Category > ASL Scripts

ASL Scripts Database

(1/17) > >>

Raxx:
Located here you will find a complete listing of ASL scripts along with their descriptions, download, author, thumbnail/preview, and links. If you would like to submit your script(s) to this post, please click here to read more.

Note: If you own one of these scripts and do not wish for it to be listed and hosted here then let me know and I will take it down.

Raxx:
Shape Scripts

Download3D PI Chart
Create any sized chunk of cylinder similar to a pie based on Divisions, Radius, Texture Scale, Start Angle, End Angle, and Depth.
Author: BOB_I_Ts [Website]
Related Links: Forum Topic


Download4 Wall
Basic frame shape that allows you to create a square-shaped "hole in the wall". You can adjust the Horizonal Scale, Vertical Scale, Depth, and the hole's offsets and sizes.
Author: BOB_I_Ts [Website]
Related Links: Forum Topic


DownloadAdvanced Plane
Creates a simple rectangular plane. You can change the width, height and the number of divisions.
Author: Vobla
Related Links: Forum Topic


DownloadArchway
Creates an archway block. You may define the width, height, length, divisions, ceiling depth, and angle.
Author: BOB_I_Ts [Website]
Related Links: Forum Topic


DownloadCage
Create a variety of cage shapes. You may specify the XYZ Size and Divisions, the thickness of the wire, and if it needs to be a single wall or a full cubic cage.
Author: Kubajzz
Related Links: Forum Topic


DownloadCog
Cog Wheel shape. Many different parameters make for a large variety of cog wheels available.
Author: BOB_I_Ts [Website]
Related Links: Forum Topic


DownloadDiamond
Make diamonds of any shape and size with this plugin. You can change the general shape along with the size, crown and pavilion height, X-Z ratio, Corner size, and Culet size.
Author: Kubajzz
Related Links: Forum Topic


DownloadE_Track
Instead of extruding splines along a spline path, this plugin allows you to extrude a mesh shape along a mesh path made out of points.
Author: Brian Heath (B_twist)
Related Links: External Website


DownloadF8ce
An an8 version of MakeHuman, allowing you to easily create a variety of humanoid characters.
Author: Bob_I_Ts
Related Links: Forum Topic


DownloadJet Engine Blades
A script that makes jet engine blades. Define the number of blades, height, width, center width, size, and inner & outer rotation.
Author: Monex [Website]
Related Links: CG-Nation Blog | About Page


DownloadLShape
Lets you create an L-shaped block or corner block. You can customize the Horizontal and Vertical Length and Width of each leg and the depth.
Author: BOB_I_Ts [Website]
Related Links: Forum Topic


DownloadParaboloid
Creates a paraboloid shape. Lets you specify the size, height, and vertical and horizontal segments.
Author: Kubajzz
Related Links: CG-Nation Blog


DownloadN-Sided Polygon
Good replacement to the N-Gon tool if you're just looking to make an N-sided plane. Options for the number of sides and toggle a center division in the parameters.
Author: Kubajzz
Related Links: CG-Nation Blog


DownloadRandom Terrain
Generate a randomly shaped terrain.
Author: Felipe Manga
Related Links: Forum Topic


DownloadRing shape
Simple and useful ring/pipe primitive.
Author: NickD
Related Links: Forum Topic


DownloadRoof (Triangular Prism)
Simple roof primitive in the form of a triangular prism. You may define the height, width, depth, and the offset of the peak.
Author: BOB_I_Ts [Website]
Related Links: Forum Topic


DownloadSlope
Create a simple slope with the option to customize the height, length, and starting/ending width and scale.
Author: BOB_I_Ts [Website]
Related Links: Forum Topic


DownloadSpring
Original spring shape by Steven Glanville. You may define the sides, diameter, offset, segments, cycles, and spread.
Author: Steve [Website]
Related Links: Anim8or.Com Scripts Page


DownloadStair Shape
Easy way to make a staircase by defining the number of steps, length, height, and width. You can also specify if the stairs need a solid support or not.
Author: BOB_I_Ts [Website]
Related Links: Forum Topic


DownloadStar
Create a nice star . You can define the number of beams, radius, thickness and more parameters.
Author: Syziph
Related Links: Forum Topic


DownloadUtah Teapot
The classic 3D teapot.
Author: Kubajzz
Related Links: Forum Topic


DownloadTetrahedron
Simple tetrahedron shape (3-sided pyramid).
Author: Kubajzz
Related Links: CG-Nation Blog


DownloadTorus
Torus or donut, you call it!
Author: Tyson Collins [Website]
Related Links: none


DownloadUV Block
Builds a cube with proper UV coordinates on all sides. If viewing from the front viewport you can adjust the UV scaling for all the sides when using the non-uniform scale tool.
Author: BOB_I_Ts [Website]
Related Links: Forum Topic

Raxx:
Command Scripts

DownloadAdd Edge Loop
More than just creating an edge loop based on an edge you select, it will try to deform it based on the surrounding mesh (make it contoured).
Author: Kubajzz
Related Links: Forum Topic


DownloadApply Selection
Select some points, store it, then apply that selection later on!
Author: Claude
Related Links:


DownloadBoolean Operations
Create a wide variety of shapes easily using this plugin! Enables union, intersection and subtraction.
Author: Kubajzz with the help of NickE
Related Links: Forum Topic


DownloadComplex Cleanup
This script will delete completely useless edges and points and it will select the points and edges you should edit to keep your mesh clean. If you want to make nice clean models, you should run this script everytime you finish a model (especially if you are a beginner...).
Author: Kubajzz
Related Links: Forum Topic


DownloadConnect Points
Connect two points of the same face and split the face in two (a knife tool)
Author: Kubajzz
Related Links: Forum Topic

DownloadCopy Faces
Do you need to duplicate a part of your mesh? You can use this tool. It does basically the same like the Detach Faces command, but the original shape is not changed.
Author: Kubajzz
Related Links:


DownloadDeform Mesh
Deform a mesh based on strength, diversity, smoothness, seed, and refresh attributes.
Author: Kubajzz
Related Links: Forum Topic


DownloadEdge Spin
Just select an edge that splits a 4+ sided polygon and spin it!
Author: Claude
Related Links:


DownloadGrow Point Selection
Select one or more points and this script will select the next nearest connected points to them.
Author: Kubajzz
Related Links: Forum Topic


DownloadPoly Reducer (Reduce Triangles)
Reduces a triangulated mesh anywhere between 1%-95% while preserving materials and UV Coords.
Author: Kubajzz
Related Links: Forum Topic

DownloadReload Textures
Reloads all textures in your project.
Author: Kubajzz
Related Links: Forum Topic


DownloadRemove Edge Loop
Select an edge loop and this script will remove it, keeping the mesh intact.
Author: Kubajzz
Related Links: Forum Topic


DownloadRemove Useless
Removes useless points on an edge that don't serve any function. This usually occurs when merging faces.
Author: Kubajzz
Related Links: Forum Topic


DownloadSelect Similar
Select one or more meshes, faces, edges, or points and this script will find similar structures and select them as well.
Author: Kubajzz
Related Links: Forum Topic


DownloadSnap2Pnt
Set a point as the snap-to point, then snap any number of other points to it!
Author: Claude
Related Links:


DownloadTriangulate Mesh
Creates a triangulated copy of a mesh.
Author: Claude
Related Links: Archived Forum Topic


DownloadTwo Point Distance
Finds the distance between 2 points.
Author: CobraSpectre
Related Links: Forum Topic

DownloadUniversal Mirroring
Need to mirror several shapes at once? This plugin can do that. It can also mirror groups, subdivisions, parametric meshes, spheres and more...
Author: Kubajzz
Related Links: Forum Topic


DownloadUnsubdivision Script
Have you ever permanently converted a subdivison object to mesh and wanted to convert it back, or picked up a previously subdivided mesh from someone else? Reverse it using this tool!
Author: Kubajzz
Related Links: Forum Topic


DownloadUntriangulate Mesh
Untriangulates a triangulated mesh!
Author: NickE
Related Links: Forum Topic

Raxx:
Export Scripts

Download.C
Exports the same C language data structures that Anim8or's built-in exporter does. Does not export animations.
Author: Steve [Website]
Related Links: Scripts Page


DownloadCelestia (.cmod)
Format for a popular space simulation program. Does not export animations.
Author: Selden [Website]
Related Links: Celestia Website | Scripts Page | Archived Forum Topic


DownloadOrbiter Mesh (.msh)
Exports to a format compatible with the Orbiter program
Author: Urwumpe [Website]
Related Links: Orbit Hangar


DownloadRoblox (.mesh)
Exports to the .mesh format compatible with a popular brick-based game. Does not export animations.
Author: Gamer3D [Website]
Related Links: Forum Topic | Roblox Website


DownloadSTL (.stl)
Exports the basic triangulated models into a regular .stl file. Does not export animations.
Author: Raxx [Website]
Related Links: Forum Topic


DownloadVRML (.wrl)
Exports objects to the Virtual Reality Modelling Language.
Author: Paulo [Website]
Related Links: Forum Topic


DownloadWaveFront Object (.obj & .mtl)
Updated to include more material properties and multiple materials per mesh. Does not export animations.
Author: Steve [Website]
Updated by: MrProtek
Related Links: Forum Topic


Download.X (by Raxx)
This is an updated .X exporter that is a mix of the best of the other .X exporters, and may be more compatible with your program of choice. Does not export animations.
Author: Raxx [Website]
Related Links: Forum Topic


Download.X (by Joe Cooning)
Exports to the popular DirectX/D3D format. Does not export animations.
Author: Joe Cooning [Website]
Related Links: Archived Forum Topic


Download.X (by zaidon)
Based on Joe Cooning's script, this version exports to the popular DirectX/D3D format but imitates the Conv3DS output structure. Does not export animations.
Author: zaidon [Website]
Related Links: Archived Forum Topic


Download.X (by Cranny76)
Exports to the popular DirectX/D3D format. Remarked to be a rough draft version. Does not export animations.
Author: Cranny76 [Website]
Related Links: Archived Forum Topic


DownloadWRL (.x3d)
Exports to the .X3D file format. More info here
Author: hermetic_cab

Raxx:
Third Party Tools

DownloadAni2Lux v0.1a
Alpha version of a converter that allows you to export Anim8or scenes to the LuxRender file format.
Author: Dwsel [Website]
Related Links: Forum Topic


DownloadAni2Pov v0.92
Converts between several different file formats
Author: Texel [Website]
Related Links: Ani2Pov Web Page | Mirror Download


DownloadASL Editor 3.5
Excellent development tool for ASL scripts.
Author: Kubajzz
Related Links: Forum Topic


DownloadBVH2Anim8or
Converts a motion capture file (BVH) to Anim8or
Author: NickE
Related Links: Forum Topic


So you want to submit a script? No problem! Just post a reply to this topic with as much information as possible in the following areas:

1. Script Name
2. Author Name
3. Download link
4. Description
5. Related links (points to one or more web pages that explain what the script is and/or how to use it)
6. (Optional but helpful) If it's a shape plugin, supply a 30x30 gif of the button like how the listing has it, and if it's a command script supply up to a 52x52 animated gif with transparent background showing it in action.

What's listed so far isn't everything but I'm working on it. Hopefully this will become a very, very, very long list ;)

Navigation

[0] Message Index

[#] Next page

Go to full version