Anim8or Community

Please login or register.

Login with username, password and session length
Advanced search  

News:

An update to Anim8or, v1.00b, is available with a few bug fixes. Get your copy HERE. See the "ReadMe" file for details.

Author Topic: Help Bending rollercoaster track  (Read 5027 times)

falloffalot

  • Guest
Help Bending rollercoaster track
« on: February 25, 2008, 02:10:14 pm »

I have created a rollercoaster with track which; if works out I will anim8 with sounds.
The problem I have I can't work out or find in the manual how to bend the straight track section.
Can anyone help?
Thanx
Logged

beyond_3rd_dimension

  • Newbie
  • *
  • Posts: 40
    • View Profile
    • My anim8or gallery in facebook
Re: Help Bending rollercoaster track
« Reply #1 on: February 25, 2008, 03:54:45 pm »

Here is the link to the manual for bending an object using modifier.....

http://www.anim8or.com/manual/3_object_editor.html#modifiers

You might have a look in the Hand tutorial as well (Bending fingres section)

http://www.anim8or.com/tutorials/hands/index.html
Logged
I trust only two persons, ME and NOT YOU

falloffalot

  • Guest
Re: Help Bending rollercoaster track
« Reply #2 on: February 26, 2008, 01:15:41 pm »


I have now managed to bend a single track piece using the mod tool,
but I have created a multi sectional track section to give the desired effect.
I have grouped all the individual sections together and then tried to bend it using the modifier.
But the track keeps disapearing.
Any ideas why?

Thanx for the help
Logged

beyond_3rd_dimension

  • Newbie
  • *
  • Posts: 40
    • View Profile
    • My anim8or gallery in facebook
Re: Help Bending rollercoaster track
« Reply #3 on: February 26, 2008, 01:49:10 pm »

I am getting the same problem. Think it's a bug. u cannot use mod tool on grouped object.

Anyway, the solutiong is to use 'Build->Join Solids' instead of Group.

Hope it will solve ur problem.
Logged
I trust only two persons, ME and NOT YOU

lynn22

  • Sr. Member
  • ****
  • Posts: 591
    • View Profile
    • 3D Animation
Re: Help Bending rollercoaster track
« Reply #4 on: February 26, 2008, 06:09:41 pm »

I would suggest to ungroup all your sections and bend each one individually, then put them all together again.
Logged

falloffalot

  • Guest
Re: Help Bending rollercoaster track
« Reply #5 on: February 26, 2008, 09:03:23 pm »

Thanks for the advice but; if I bend the sections ungrouped, then rebuild them individually their `bend` and length becomes inaccurate and it all starts to get complicated.
I may have answered my own post in a way but the following may help someone else out.
So what I have now done is re-made the section out of 1 cube but with enough divisions to recreate what I had before. Then as a mesh extruded, reduced or removed the desired edges to make the section I need. With this method I can manipulate the entire section without any problems (yet).
Thanks again
« Last Edit: February 26, 2008, 09:48:51 pm by falloffalot »
Logged

benzjie

  • Jr. Member
  • **
  • Posts: 95
    • View Profile
Re: Help Bending rollercoaster track
« Reply #6 on: February 27, 2008, 07:33:47 am »

why dont you make the rollercoaster track like this......use the straight / curved path to layout the way the track should run... make a primitive ( ngon) and then "extrude"  and check the path box. With the ngon still colored white click on the path you made.
Logged

falloffalot

  • Guest
Re: Help Bending rollercoaster track
« Reply #7 on: February 27, 2008, 01:17:07 pm »

This is a pic of the track. Only the rails, horizontal supports and the walkboards need to be bent.
Thanx for the reply benzjie I'll give it a go, but I don't think there are any short cuts to speed up the process I'm just going to do it piece-by-piece.  :'(


Logged

benzjie

  • Jr. Member
  • **
  • Posts: 95
    • View Profile
Re: Help Bending rollercoaster track
« Reply #8 on: February 27, 2008, 02:04:22 pm »

oops..that lloks more complicated then what i had in mind. What would be usefull here is a "duplicate along path "  script.  then you would only need a small segment of the rail and 1 horizontal support and then duplicate. Unfortunately..........
Logged

lynn22

  • Sr. Member
  • ****
  • Posts: 591
    • View Profile
    • 3D Animation
Re: Help Bending rollercoaster track
« Reply #9 on: February 27, 2008, 11:05:10 pm »

Keep at it, it looks very nice, great job.
Logged

falloffalot

  • Guest
Re: Help Bending rollercoaster track
« Reply #10 on: February 28, 2008, 02:14:33 pm »

Thanks for the positive feed back lynn22
This is a copy of a scale working model I have made for my son, as he is rollercoaster mad.
Hopefully, once complete I will be able to get the carts to run round the track.
Hopefully.
Logged

headwax

  • Sr. Member
  • ****
  • Posts: 600
    • View Profile
    • Headwax's Website
Re: Help Bending rollercoaster track
« Reply #11 on: February 29, 2008, 04:05:58 am »

Logged

falloffalot

  • Guest
Re: Help Bending rollercoaster track
« Reply #12 on: February 29, 2008, 10:08:16 am »

Not seen that site before.
Thanks.
Logged