Anim8or Community

General Category => General Anim8or Forum => Topic started by: mfox7 on January 01, 2008, 08:18:49 am

Title: Undo bug?
Post by: mfox7 on January 01, 2008, 08:18:49 am
Hi.  This is probably a question that has been addressed someplace before, but I have no idea what to do about it.

OK, so here's what happens:  I'm in Figure Mode, and 2 really strange things happen when I move objects.

First, the object moved (and sometimes others in the scene) seems to lose its materials and turn to a shade of gray.

Second, when I hit "Undo" I get this message:
----------------------------------------
The instruction at "0x0043dda3" referenced memory at "0x00000000".  THe memory could not be "read".

Click on OK to terminate the program.
----------------------------------------
Obviously, this is some programmer-level code and it's written in a language I don't understand.  Does anybody know what's going on, or what can be done about this?

Thanks so much :)
Title: Re: Undo bug?
Post by: flametiger74 on January 01, 2008, 12:02:35 pm
Figure mode is a bit skethcy maybe e-mail steve with the bug. and which anim8or are you using. Give us some details about your computer maybe you have no more memory left on your computer.
Title: Re: Undo bug?
Post by: Steve on January 02, 2008, 04:28:04 am
Doe this always happen  Can you send me an .an8 project that shows the problem and tell me what parts to move and undo that causes it?  I can't reporduce the problem myself.