General Category > General Anim8or Forum

Fresnel Lens

(1/2) > >>

Ralf1324:
Hey, all. I am currently making a model of a theatrical light called A Fresnel lantern. I have completed everything but the lens. I can't figure out how to make the lens look like a Fresnel lens (http://spie.org/Images/Graphics/Newsroom/Imported/333_1628_0_2006-08-05/333_fig1.jpg) Look at the image all the way to the right. That is a side view of what the Fresnel lens should look like. Any ideas?

Kubajzz:
I'm not really sure if I understand what you want to do, but I would try lathing...

Just draw a spline in the shape you need and click Build>Lathe...

Kubajzz:
Ok, it seems we have a different problem... Meshes and splines are something very different and it's not possible to use "Convert to mesh" and "Convert to spline" tool. I guess you used some mesh, deleted most of it's points so you had only a few edges left and tried to lathe this; it doesn't work because what you have is still a mesh and it's not possible to cenvert it to spline.
Here it goes step by step what you should do:

1. You must select the "Curved path" tool in Object mode and draw the spline; look at this part of the manual - it gives a full explanation on how to make/edit splines

2. When drawing the spline, remember that the new mesh will be created by rotating the spline around one axis; therefore some points of the spline should be placed directly on the axis. Click here to display "Lathing" chapter in the manual

Hope this helps... Good luck

Ralf1324:
I drew a spline and lathed it, but that didn't work.. (http://www.starmgc.com/images/fresnel.jpg) A better representation of the lens.

Ralf1324:
Yeah..I figured out the meshes couldn't be converted after I tried it lol ^_^...But my problem is making the shape..I will try different things and post again later..look at my previous post for a better example of the actual lens.

Navigation

[0] Message Index

[#] Next page