General Category > Ongoing Anim8or Development

Changed to Older Releases [builds 1162 to 1230]

<< < (5/137) > >>

SubDrag:
Sounds good, thanks for feedback!

Oops I forgot I already posted about greyscale with a sample, sorry. http://www.anim8or.com/smf/index.php/topic,4778.msg34733.html#msg34733

The environment mapping was spherical yeah, but sounds like you knew about it.

For line lengths and screen coords, was CAD drawing mode lines, not mesh. : http://i.gyazo.com/1926408c79ab5adebee64cf0f70210d1.png

If too much on screen for showing line lengths, maybe just show the length for the one you clicked in status bar for now?

Also (per same pic), the bottom right has a positive number, top right had a negative number, of which there should have only been a negative number if it were using world coords because the line started at 0,0,0, so I think the coords are screen not world.

Steve:
The coordinates are world coordinates. If you look at the axis in the lower left corner of the "TOP" view the Z axis points down so higher points on the screen have a lower Z value than the lower ones. In the "BOTTOM" view the Z axis is reversed with lower Z values lower on the screen.

Yes, I will add some kind of line length once I figure out a good way to do it.

Still chasing the other issues - especially the window title. It stopped working between build 1084 and 1086 but I can't figure out why.

Trevor:
Hi, just thought id try registering to clarify a few things. We had problems registering a while back and only sub got in.

anyway, i was reading the replies and need to clarify some things.
first off here is the original image where i listed the bugs.
http://fgfc.ddns.net/Goldfinger/An8Bugs_1088.jpg

so, the world co-ords do not show correctly. Yes its a top view, but the line starts at 0,0,0 extentd left to -282,0,0 then up to -282,0,-238 then the final line comes down and right by some amount that the cad mode does not list unfortunately.
so, we know the world co-ords are between 0 and -238 yet clearly you can see its saying -119.6 and +118.4 which is wrong for world co-ords. These numbers also change if you move the view or zoom.

glad to hear your on the other bugs.

what ideas do you have for measurements in cad mode?
to list some ideas would include drawing measurement on last drawn / currently selected line (plus angle to previous line. I.e. In my image i have 2 90's and a 45-ish angle)

another but more complex suggestion would be most significant measurements at zoom level. I cant possibly imagine this coding monstrosity though.

thank you for an8 and have a good holiday,
Trevor

Steve:
OK, now I see what you mean.  I was looking at it with the center of the view in the center of the screen in the default view. Moving it off-center shows the problem.  I'll fix this (but unfortunately not until August since I'm leaving in a few hours :( )

Pincho:
Reference images are not working which has been mentioned. But they also vanish completely if you use the cutting tool on a model in front of them.

Navigation

[0] Message Index

[#] Next page

[*] Previous page