Anim8or Community

Please login or register.

Login with username, password and session length
Advanced search  

News:

Ian Ross has just released a book on Anim8or. It's perect for a beginner and a good reference for experienced users. It contains detailed chapters on every aspect, with many examples. Get your own copy here: "Anim8or Tutorial Book"

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - CoriDavis

Pages: 1 ... 5 6 [7] 8 9 ... 38
91
Anim8or Challenges / Re: Challenge #29: GIANT ROBOTS!!!
« on: May 14, 2012, 06:12:04 pm »
Test Vid:


This is pre-textured, pre-evnironment, pre-post.

Not bad! The landing looked great, but something seemed off about the takeoff

92
Finished Works and Works in Progress / Re: 'Grubbing Up' a texture?
« on: May 04, 2012, 09:37:01 pm »
I haven't found any way to do this or I would have done it long ago.

93
Finished Works and Works in Progress / Re: Rainbow Factory
« on: April 29, 2012, 10:22:07 am »
Thanks, the big tanks are actually for the fluid or water that would power the piston.  We worked with smaller versions of pistons in my engineering class last year. Guess I should look back at my notes to see what I need.  I can't decide if it should be a hydraulic or pneumatic piston.  Air might compress too much to push heavy metal, but liquid might not flow fast enough.  Looks like the only thing I'm missing really is a pump and I don't know where I should put it.

Any suggestions on how to make the chains?

94
You like Ponies, don't you Raxx...

95
Finished Works and Works in Progress / Re: Rainbow Factory
« on: April 26, 2012, 08:37:56 pm »
Well I am trying to base it as much on the fic as possible.  It does show brass things in the BronyDanceParty PMV and the Rainbow Factory picture kind of looks brassy I guess.  I was going by what I imagined when I read the description and what made sense.  (and I looked up the brass thing. It can't rust, it just tarnishes)

96
Finished Works and Works in Progress / Re: Rainbow Factory
« on: April 26, 2012, 07:14:33 pm »
I figured it was supposed to be steel.  the fanfic says " At the top of the stack was a single opening, red with rust despite the rest of the machine to be shiny and clean." and I don't believe Brass can rust. (Even though the 'rust' turned out to be blood in the end, but it wouldn't be suspected to be rust if it was brass I would assume).

This is the description of the machine:
"It was fairly open and empty, almost like an theater room. At one end of the room, there was six square vats, (oops, I made them round...) each one nearly full with individual Spectra. Above them was a peculiar looking machine. From a central stack, six hoses broke off and lead above each of the individual vats. At the top of the stack was a single opening, red with rust despite the rest of the machine to be shiny and clean. Even further above that was a fairly complex looking object, with chains and gears hanging off of beams and pipes loosely. (How am I going to make chains, especially chains that will be able to move?) Running even higher than the whole machine was a length of scaffolding, with doors on either side leading out of the room."

97
Finished Works and Works in Progress / Re: Rainbow Factory
« on: April 26, 2012, 05:37:07 pm »
Valves and meters, Check! I made the amount inside each tank vary since they probably wouldn't all have the same amount.  That would be unrealistic.  I added valves where you suggested and tried to make it look a little more like the picture (but not too much since I don't want to get in trouble for copyright)  Anything else I should add? I feel like the big tanks in the back need more pipes leading to them, but where?

98
That's awesome! I love how you managed to do the hair.  I like the right render better, the left looks kind of like it's glowing a little too much.  I do agree with Raxx though on the mouth, it needs some kind of joint on it.

99
I've never even used the knife tool. I select the edge and click "Cut Edges" from the Edit menu.  If that is what you're trying to do

100
Finished Works and Works in Progress / Re: Rainbow Factory
« on: April 25, 2012, 04:11:52 pm »
The big boxes on the side were supposed to be part of some sort of piston system for the crusher.  I edited quite a bit of it along with some air tanks that would power the piston (unless air power wouldn't be enough).  I need to think of more pipes and stuff to add so I can have a whole background made out of the machine

101
Finished Works and Works in Progress / Re: Rainbow Factory
« on: April 24, 2012, 05:40:26 pm »
More progress on the Rainbow Machine.  Any suggestions where I should put the support beams to hold up the giant crusher that looks like it weighs over a ton and would surely bend those pipes if not supported?

102
Finished Works and Works in Progress / Re: Rainbow Factory
« on: April 24, 2012, 10:56:55 am »
Already tried checking normals. They're all how they should be

103
Finished Works and Works in Progress / Re: Rainbow Factory
« on: April 23, 2012, 08:56:01 pm »
Thanks! It looks a lot better now. I added some texture too.  I was using the metallic settings on the Material section of the manual before

104
Finished Works and Works in Progress / Re: Rainbow Factory
« on: April 23, 2012, 07:39:01 pm »
Started working on the spectra tubs.  I based it off of this picture:



I'm not really a mechanical modeler. I prefer to work on the organic side, but hopefully I can make it look good.  I can't figure out why it turned out so dark and didn't come out very metallic like the preview circle showed.

105
Finished Works and Works in Progress / Re: pikachu WIP
« on: April 23, 2012, 10:54:42 am »
Aww! it's cute already!

Pages: 1 ... 5 6 [7] 8 9 ... 38